As you are taking and enjoying your long shower, the hot water supply cuts off suddenly. If you find that to be a familiar experience, your water heater is running out of hot water too quickly. Rest assured that you are not alone, for that this is actually a common problem that many people will experience. While we may be quick to put the blame on the water heater itself, the problem can sometimes stem from the lack of proper maintenance. Read on to find out some of the reasons why water heaters run out of hot water so you can prevent such an occurrence in the future.
Presence of Sediment in Your Water Heater
While the water that flows through the valve into your house is safe for consumption, the minerals inside such as calcium and magnesium can collect and settle at the bottom of your water tank. Over time, these sediments can slowly build up and even form sludge.
Needless to say, the presence of sediment and sludge can greatly interfere with your water heater’s ability to heat up the tank. This can result in less hot water or even no hot water being produced at all. As such, it is recommended for water heaters to be maintained minimally once a year to prevent the build-up of these sediments. Maintenance can be done simply by flushing your water heater. To minimize the build-up of sediments in your water heater, we recommend using water heaters that feature a circulator pump.
Your Water Heater Is Too Old
Regardless of how good the quality of your water heater is, it is sure to eventually reach the end of its life. The same also applies to other appliances in the house, such as the home’s cooling system. If your water heater has been in use for an extended period such as 10 to 12 years, it might very well be the reason why your water heater is running out of hot water quickly.
If you are looking for a commercial-grade water heater to replace your existing one, we recommend that you consider The Brigade, a water heater that delivers hot water in the most reliable manner.
High Hot Water Usage
Apart from problems with the water heater, the problem could also lie in the fact that you are simply using too much hot water. If there are several sources of hot water usage going on at once, your water heater might understandably struggle from meeting the high demand.
Problems with the Thermostat
The thermostat in water heaters is responsible for controlling the temperature of the water. As such, a fault in the thermostat can likely cause your water heater to no longer dispense hot water. If you suspect that there is an issue with your thermostat, try resetting it and see if the problem still persists. Alternatively, you can also try to raise the temperature of your thermostat and see if there is any difference.